Skip to content
Description
Washer anti-vibration pads · set of 4
A quieter spin, and a washer that stays where you put it.
These are four anti-vibration feet for a washing machine. Each machine foot sits down into a cup with a grid well, and each cup stands on a soft black rubber suction base. Together they soak up the shake from the spin cycle and give the machine a firm grip on the floor, so it hums instead of thumping and stays right where you put it.
They also work under a dryer, a fridge, or furniture legs that rock or scuff the floor.
How they work
A cup for the foot, rubber on the floor.
A washer shakes most on the spin, when the drum is heavy and turning fast. On a bare floor that movement goes straight into the tiles or boards, which is where the drumming noise comes from, and it can nudge the machine along a little every load.
Each pad puts two things between the foot and the floor. The gray cup holds the machine's leveling foot in its grid well so it stays put, and the soft black base grips the floor through a ringed suction face. The result is less noise and less wandering: a calmer laundry room, load after load.
The base
Soft rubber underneath.
Turn a pad over and you find a round black rubber base with concentric rings and a small tab on its edge. Pressed onto a smooth, clean floor, the base grips; lift the tab and it lets go when you want to move the machine to clean behind it.
The suction seals best on smooth, hard floors such as tile, sealed concrete, vinyl or laminate, and the soft rubber keeps its grip on textured floors too.
Fitting them
Three steps, a few minutes.
Tip it back
Unplug the machine, then tip it back a little so the front feet lift off the floor. A second pair of hands makes this easier.
Foot in the cup
Set a pad under each foot, rubber side down, and lower the machine so each foot drops into the grid well of its cup. Repeat at the back.
Level it again
The pads lift the machine slightly, so check it with a level and adjust the machine's own feet until it sits flat and steady.
Where they go
Washers first, and more.
One set of four covers one machine with four feet. If your washer and dryer stand side by side, you will want a set for each.
The same pads sit under a fridge, a chest freezer, a table or a chair leg to stop rocking and to keep the feet off the floor surface.
Why they work for you
Built for the washer you already own.
- Made for your feet. The top of each pad is 2.4 in (6 cm) across and the foot sits in the well inside it, so the round screw-in leveling feet that most washers and dryers have drop straight into the cup.
- Steady spin after spin. Level the machine once after fitting and spread heavy bedding evenly, and the pads take care of the vibration and the walking.
- Quiet enough for night laundry. Less thump through the floor means a more peaceful laundry room and neighbors who stay happy.
- Grippy and easy to keep that way. Wipe the floor and the bases when you fit them, and whenever you move the machine, and the rubber keeps its hold.
Proof
Rated highly by homeowners
“Excellent shock absorption and the washer doesn’t thump anymore on spin cycles.”
“My laundry room is now peaceful; the loud thumps during spin are gone and I can run a load at night.”
“Does exactly what it’s meant to do; my washer used to walk and now it just sits there.”
“Really helpful for minimizing noise and keeping the washer steady; ideal for apartments.”
“I like that they were easy to install and stopped the shaking/vibrating of my washing machine. Love it!”
“Good grip and quieter spin cycles; better than rubber pads I tried before.”
Every set is backed by our 90-day money-back guarantee.
What arrives
Four pads, ready to use.
Enough for one machine with four feet.
Specifications
The details, plainly.
Less shake, less noise, less wandering.
Four anti-vibration pads that cradle your washer's feet on soft rubber suction bases.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.